Triumph Tiger Explorer XR 2017 Service Manual page 691

Tiger Explorer XR Series
Test
- Chassis ECM pin A07 to ABS ECM
pin 11
- Chassis ECM pin A08 to ABS ECM
pin 10
6 Check cable for short circuit:
- Chassis ECM pin A07 to Chassis
ECM pin A08
7 Reconnect harness, clear fault code
and run engine to verify fault cleared
Circuit Diagram
Inertial Measurement Unit (IMU) Signal (CAN)
Fault Code
C1089
Pinpoint Tests
Test
1 Check IMU part number is correct for
the motorcycle
2 Check that the engine ECM and
chassis ECM tunes are correct for the
motorcycle, using the diagnostic
software
687 of 746
Result
Open circuit
OK
Short circuit
OK
Fault still present
Possible Cause
Inertial Measurement Unit (IMU)
ID incompatible
Result
OK
Incorrect
OK
Incorrect
Action
Locate and rectify wiring fault, proceed
to test 7
Proceed to test 7
Locate and rectify wiring fault, proceed
to test 7
Action complete - quit test
Contact Triumph service
Action
Proceed to pinpoint test 1:
Action
Proceed to test 2
Replace IMU with correct part and
proceed to test 3
Proceed to test 3
Update the tunes using the diagnostic
software, proceed to test 3
ELECTRICAL