Triumph Tiger Explorer XR 2017 Service Manual page 326

Tiger Explorer XR Series
2. From the top of the motorcycle, follow the route of the hose to the roll over until near the top of the
crankcase tidy. Then gently push the hose towards the rear of the motorcycle to release the roll over valve
from the crankcase tidy.
Note
The hoses connected to the roll over valve are marked with a white spot. When correctly fitted and in
the crankcase tidy, these spots will face the rear of the motorcycle.
3. From the right hand side of the motorcycle, manoeuvre the roll over valve out, disconnect the two hoses and
remove the roll over valve.
Roll Over Valve - Installation
322 of 746
chkm
1. Hose to roll over valve
4
1. Roll over valve
2. Hose, from fuel tank
3. Hose, to atmosphere
4. White spots
WARNING
1
2
1
3
FUEL SYSTEM / ENGINE MANAGEMENT