Triumph Tiger Explorer XR 2017 Service Manual page 484

Tiger Explorer XR Series
Check the condition of the sealing diaphragm. Replace the diaphragm as necessary.
Core Activity
Ensure absolute cleanliness when adding brake fluid to the brake fluid reservoir. Do not allow moisture or
debris to enter the cylinder as this will adversely affect the fluid properties. Always use fluid from a sealed
container and do not use fluid from a container which has been opened for any period of time. Always check
for fluid leakage around hydraulic fittings and for damage to hoses.
A dangerous riding condition leading to an accident could result if this warning is ignored.
To prevent paint damage, do not spill brake fluid onto any area of the bodywork. Spilled brake fluid will
damage paintwork.
To correctly bleed the rear brake system, both manual and ABS system bleed procedures must be completed
then repeated in the following sequence:
Complete the manual bleed procedure for rear caliper.
Complete the ABS system bleed procedure.
Repeat the manual bleed procedure.
Repeat the ABS system bleed procedure.
Repeat the manual bleed procedure.
Manual Bleed Procedure
1. Remove the cap from the rear bleed nipple.
2. Attach a transparent tube to the bleed nipple.
480 of 746
chlh
1. Fixings
2. Rear reservoir cap
3. Upper level
4. Lower level
WARNING
CAUTION
1
3
2
BRAKES