Triumph Tiger Explorer XR 2017 Service Manual page 264

Tiger Explorer XR Series
1. Turn the ignition to the OFF position and wait at least 1 minute for the engine ECM to complete its power
down sequence.
2. Detach the engine ECM from it's location under the front seat support (see Engine Electronic Control
Module (ECM) - Removal).
Note
Two different sized connectors are used in the engine ECM, which ensures correct connection is
always made. The connectors are coloured black and correspond with identical connectors on the
main harness.
3. Press down on the locking device and gently pull back on the connector to release it from the engine ECM.
Reconnection of Engine ECM Connectors
Damage to the connector pins may result if an attempt to fit the connectors incorrectly is made.
1. Fit the connector into its socket. When the locking lever starts to move, stop pushing the connector and use
the locking lever to fully insert the connector home and lock it.
260 of 746
1
1. Locking device
2. Locking lever
CAUTION
1
ciji_1
2
2
FUEL SYSTEM / ENGINE MANAGEMENT