Triumph Tiger Explorer XR 2017 Service Manual page 393

Tiger Explorer XR Series
Note
It is much easier to tighten the top cap when the fork has been refitted.
When refitting the fork, tighten the top cap as described in Front Fork - Installation.
30. Refit the front fork (see Front Fork - Installation).
Turn the ignition on and allow the Triumph Semi Active Suspension (TSAS) system to calibrate.
Always return the TSAS system to its original settings as noted prior to disassembly. Riding the
motorcycle with unfamiliar suspension settings may cause unexpected handling characteristics leading to
loss of motorcycle control and an accident.
Ensure that the instrument TSAS mode and damping settings are returned to the settings noted prior to
disassembly.
Turn the ignition off.
Check
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
Note
When checking the headstock free play, hold the lower end of the outer tube when carrying out the
free play check.
1. Raise and support the front of the motorcycle.
2. Hold the lower end of the outer tube of the front forks as illustrated and 'rock' with a front-to-rear motion. If
free play can be detected, the headstock bearings require adjustment.
Adjustment
389 of 746
WARNING
WARNING
Headstock Bearing Adjustment Check
WARNING
FRONT SUSPENSION