Tiger Explorer XR Series
2.
Withdraw the starter motor torque limiter from the crankcase, collecting the washers from each end of the
shaft as you do so.
Assemble T3880608 - Flywheel Pin Set (flywheel pin set) to T3880606 - Flywheel Restraint (flywheel
3.
restraint), ensuring the shorter pin is fitted to the short arm of T3880606 - Flywheel Restraint. Fit the nuts
and tighten to 10 Nm.
4.
Using T3880606 - Flywheel Restraint and T3880608 - Flywheel Pin Set, prevent the flywheel from turning
199 of 746
chgh
1.
Idler shaft
2.
Idler gear
2
1
chgg
1.
Starter motor torque limiter
2.
Flat washers (outer shown)
2
3
1.
T3880606 - Flywheel Restraint
2.
Pins (part of T3880608 - Flywheel Pin Set)
3.
Nuts (part of T3880608 - Flywheel Pin Set)
2
1
TRANSMISSION