Triumph Tiger Explorer XR 2017 Service Manual page 37

Tiger Explorer XR Series
Crankshaft Run-out
Transmission
Final Drive
Type
Gear Ratios
Gear Selector Fork Thickness
Gear Selector Groove Width
Gear Selector Fork to Groove Clearance
Final Drive
Front Bevel Box
Rear Bevel Box
Final Drive Ratio
33 of 746
0.020 mm or less (standard)
0.050 mm (service limit)
6 Speed, Constant Mesh
1st 2.846:1 (13/37)
2nd 2.056:1 (18/37)
3rd 1.583:1 (24/38)
4th 1.2916:1 (24/31)
5th 1.138:1 (29/33)
6th 1.037:1 (27/28)
Input shaft 5.8 - 5.9 mm (standard)
5.7 mm (service limit)
Output shaft 6.3 - 6.4 mm (standard)
6.2 mm (service limit)
Input shaft 6.0 - 6.1 mm (standard)
6.2 mm (service limit)
Output shaft 6.5 - 6.6 mm (standard)
6.7 mm (service limit)
0.500 mm max
Shaft drive
Bevel geared crown wheel and pinion
Bevel geared crown wheel and pinion
2.557:1
SPECIFICATIONS