Tiger Explorer XR Series
13.
Route the harness for the side stand switch as noted for removal.
14.
Fit the side stand and tighten its fixings to 70 Nm.
15.
Tighten the upper fixings for the left hand control plate to 18 Nm.
16.
Fit the transmission linkage to the gear change mechanism as noted for removal.
17.
Fit the pinch bolt and tighten it to 9 Nm.
443 of 746
1
2
1.
Fixings
2.
Control plate
1
2
chme
1.
Fixings
2.
Side stand
1
3
2
REAR BEVEL BOX / DRIVE SHAFT