Triumph Tiger Explorer XR 2017 Service Manual page 319

Tiger Explorer XR Series
4. Remove the MAP sensor (see Manifold Absolute Pressure (MAP) Sensor - Removal).
5. Remove the rear fixings of the airbox.
6. Gently lift the rear of the airbox to release it from the throttle bodies.
7. Detach the air intake duct from the frame and slide the airbox rearwards to release it from its front mounting
for complete removal.
1. Inspect the intake rubbers for splits, damage and distortion.
2. Inspect the intake rubber retaining rings for loss of elasticity.
3. Check the airbox itself for damage.
Airbox - Installation
315 of 746
2. Hose
3. Breather drain hose
1
chjh
1. Fixings
1
chji
1. Air intake duct
2. Front mounting
WARNING
2
FUEL SYSTEM / ENGINE MANAGEMENT