Triumph Tiger Explorer XR 2017 Service Manual page 338

Tiger Explorer XR Series
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
If the engine has recently been running, the exhaust components may be hot to the touch. Contact with the
hot components may cause damage to exposed skin. To avoid skin damage, always allow the hot parts to
cool before working on the exhaust system.
Remove the rider's seat (see Rider's Seat - Removal).
Disconnect the battery, negative (black) lead first.
Remove the sump guard (see Sump Guard - Removal).
Remove the radiator (see Radiator - Removal).
Note
Note the position and orientation of the exhaust clamp for installation.
1. Release the clamp securing the silencer to the intermediate pipe.
2. Release the bolt securing the silencer to the frame.
334 of 746
WARNING
WARNING
3
chjo
1. Clamp fixing
2. Silencer
3. Header pipe
2
2
1
1
FUEL SYSTEM / ENGINE MANAGEMENT