Triumph Tiger Explorer XR 2017 Service Manual page 479

Tiger Explorer XR Series
3. Note the setting of the brake lever adjuster to ensure it is returned to the same position when the overhaul
operation is complete. If fitted, Note the position of the handguard bracket for installation.
4. Remove the pivot lock nut and bolt securing the brake lever to the master cylinder, and remove the lever.
Collect the handguard bracket if fitted.
5. Disconnect the brake hose from the master cylinder. Discard the two sealing washers.
6. Release the clamp bolts from the handlebar and remove the master cylinder.
Front Brake Master Cylinder - Disassembly
1. Detach the rubber boot from the lever end of the cylinder.
2. Remove the circlip from beneath the boot.
3. Remove the piston set from the master cylinder bore noting the relative position of the seals and piston
components.
475 of 746
2
3
1. Handguard end fixing
2. Handguard to bracket fixing
3. Handguard (right hand shown)
4. Spacer
5. Handlebar end weight
ceqt
1. Circlip
1
4
1
BRAKES