Triumph Tiger Explorer XR 2017 Service Manual page 314

Tiger Explorer XR Series
2. Invert the assembly and allow the float unit to slide free.
3. Discard the old float unit.
4. Insert the new float unit in the orientation shown below ensuring the magnet cover on the face of the unit
faces towards the bottom of the support tube.
Note
It is possible to fit the float unit upside down. An incorrect fuel level reading will be indicated during
motorcycle operation if the float unit is fitted upside down.
5. Refit the lid ensuring the tabs on the lid locate correctly with the cut-outs in the top of the support tube.
Fuel Level Sender Assembly - Installation
Fuel Pressure Checking
310 of 746
2
ccsw
1. Tab
2. Lid
2
1
chpo_1
1. Support tube
2. Float unit
3. Lid
4. Magnet cover
5. Slider
1
3
4
5
FUEL SYSTEM / ENGINE MANAGEMENT