Triumph Tiger Explorer XR 2017 Service Manual page 420

Tiger Explorer XR Series
Note
The electrical connector is a push fit and sealed with an o-ring.
7. Locate the electrical connector to the rear suspension unit and tighten the fixing to 1 Nm.
8. Reconnect the fly lead.
9. Refit the stone protector and tighten the fixings to 5 Nm.
10. Secure the fly lead to the stone protector with a new cable tie as noted during removal.
Refit the rear suspension unit (see Rear Suspension Unit - Installation).
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
416 of 746
1
2
cjkm
1. Fixings
2. Electrical connector
2
1
cjks _1
1. Cable tie
2. Fly lead
3. Fixings
4. Stone protector
WARNING
3
4
REAR SUSPENSION