Triumph Tiger Explorer XR 2017 Service Manual page 708

Tiger Explorer XR Series
The swinging arm position sensor's actuator arm operates vertically.
Care should be taken to not allow the actuator arm to twist or bend during removal of the ball stud.
Twisting or bending the actuator arm may cause damage to the actuator arm or the internal components of
the swinging arm position sensor.
Note
Apply a smear of proprietary general purpose grease to NLGI 2 standard to the ball stud.
If the ball stud is removed from the sensor for any reason a new ball stud must be fitted.
3. Position the ball stud to the link rod socket as noted during removal.
4. Refit the sensor cover.
704 of 746
1
cjlw
1. Position sensor
2. Fixings
CAUTION
1
cjlu
1. Link rod socket
2. Ball stud
2
2
2
ELECTRICAL