Triumph Tiger Explorer XR 2017 Service Manual page 608

Tiger Explorer XR Series
52. Refit the fixing securing the left hand engine bar to the link bar. Do not fully tighten at this stage.
53. Loosen the fixing securing the right hand engine bar to the link bar.
54. Tighten the side stand bolts to 70 Nm.
55. Tighten the engine bar upper mounting bolt to 18 Nm.
56. Tighten the engine bar centre mounting bolt to 18 Nm.
57. Position the link bar equally between the left hand and right hand engine bars. Tighten the fixings to 5 Nm.
58. Lower the motorcycle and park on the side stand.
Pannier Mounting Frames - Installation
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
1. If fitted, remove the panniers as described in the Owner's Handbook.
2. Remove the three fixings and remove the pannier link bar.
604 of 746
4. Side stand bolt
5. Engine bar, left hand
6. Radiator mounting bracket
2
1
3
1. Fixing
2. Link bar
3. Engine bar, left hand side
WARNING
2
1
FRAME / BODYWORK