Triumph Tiger Explorer XR 2017 Service Manual page 516

Tiger Explorer XR Series
Function Examined
Rear wheel speed
Brake switch status
ABS warning light status
Bleed System
Using the Triumph diagnostic tool, it is possible to bleed the ABS modulator of trapped air. This is necessary
when the hydraulic brake system has been dismantled, or the ABS modulator renewed.
Full details of this procedure are provided on page Bleeding the Front Brakes, Renewing Brake Fluid for front
brakes or page Bleeding the Rear Brakes, Renewing Brake Fluid for rear brakes.
Diagnostic Trouble Codes
ABS Electrical Connectors
Further Diagnosis
Diagnostic Trouble Codes (DTCs) are logged in the ABS ECM memory when there is a confirmed fault in the
system.
The codes are reported to the Triumph diagnostic tool as a four digit code.
DTCs can be removed at any time using the Triumph diagnostic tool.
The system will log the diagnostic trouble codes listed below:
Diagnostic
Trouble Code
(DTC)
Front wheel
sensor short
circuit to
ground or
open circuit
Front wheel
sensor
incorrect or
missing signal
Rear wheel
sensor short
circuit to
ground or
open circuit
Rear wheel
sensor
incorrect or
missing signal
Front wheel
pulser ring
missing teeth
512 of 746
Fault Description
Front wheel sensor short circuit to ground or open circuit
Front wheel sensor incorrect or missing signal
Rear wheel sensor short circuit to ground or open circuit
Rear wheel sensor incorrect or missing signal
Front wheel pulser ring missing teeth
Result Reported (Scale)
km/h
On/Off
On/Off
Pinpoint Test
Front Wheel
Sensor Open
Circuit/Short Circuit
Front Wheel
Sensor Incorrect or
Missing Signal
Rear Wheel
Sensor Open
Circuit/Short Circuit
Rear Wheel
Sensor Incorrect or
Missing Signal
Front Wheel Pulser
Ring Missing Teeth
BRAKES