Triumph Tiger Explorer XR 2017 Service Manual page 340

Tiger Explorer XR Series
8. Remove the bolt from the rear mounting point on the header pipe.
9. Release the header pipe fixings at the cylinder head.
10. Detach the header pipe assembly and collect the seals from the cylinder head ports.
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
1. Fit new seals to the cylinder head.
Note
A smear of grease may be used to retain the seals in the cylinder head during assembly.
336 of 746
1. Oxygen sensor
1
2
chjq
1. Bolt
2. Header pipe
WARNING
2
chjs
1. Cylinder head
2. Seals
1
FUEL SYSTEM / ENGINE MANAGEMENT