Triumph Tiger Explorer XR 2017 Service Manual page 15

Tiger Explorer XR Series
1. Grease the bearing races and the ball bearing carrier.
2. Rotate the bearing to ensure that the grease is distributed over the entire circumference of the internal parts.
1. Coat the needle rollers with grease.
2. Ensure the needle rollers turn so that the grease is distributed over the entire circumference of the internal
parts.
3. Assemble the parts, adjust and check as necessary.
Metal Bushes
1. Disassemble the parts as necessary to access the bush.
2. Remove the old grease.
3. Apply fresh grease to the metal bush.
Fuel Handling Precautions
General
The following information provides basic precautions which must be observed if petrol (gasoline) is to be
handled safely. It also outlines other areas of risk which must not be ignored. This information is issued for basic
guidance only and, if in doubt, appropriate enquiries should be made to your local Fire Officer.
Petrol – Gasoline
When petrol (gasoline) evaporates it produces 150 times its own volume in vapour which when diluted with air
becomes a readily ignitable mixture. The vapour is heavier than air and will always fall to the lowest level. It can
readily be distributed throughout any indoor environment by air currents, consequently, even a small spillage of
petrol (gasoline) is potentially very dangerous.
11 of 746
ceon
Angular Contact and Ball Bearing
ceop
Needle Roller Bearings
GENERAL INFORMATION