Tiger Explorer XR Series
6.
Temporarily detach the right hand control plate from the frame.
7.
Remove the fixings securing the drag link to the frame and remove the drag link. Discard the lock nut.
Rear Suspension Unit - Disassembly
1.
Clean all components and inspect the drag link and bearings for damage/wear.
2.
Check the rear suspension unit lower bearings for wear.
3.
Check the drop link bearings for wear.
4.
Renew as necessary.
Rear Suspension Unit - Spring Assembly
1.
Remove the drag link sleeves and pack the bearings with fresh grease (NLGI 2 specification grease). Refit
408 of 746
2.
Heel guard
1
chmy
1.
Control plate
2.
Fixings
3
1
3
chnw_1
1.
Drag link
2.
Drop links
3.
Lock nuts
2
3
2
REAR SUSPENSION