Triumph Tiger Explorer XR 2017 Service Manual page 624

Tiger Explorer XR Series
5. Position the ambient air pressure sensor to its mounting on the battery tray and secure with the fixing.
Tighten the fixing to 1.5 Nm.
6. Route and attach the following to the battery tray as noted during removal:
Main fuse box
ABS fuse box
Heated seats main harness electrical connectors
USB socket
Powered top box electrical connector.
7. Route and connect the following as noted during removal:
Rear wheel speed sensor electrical connection
Front heated seat switch electrical connector (if fitted)
Heated seats sub harness to main harness electrical connectors (if fitted)
Alarm electrical connector.
Fit the rear mudguard (see Rear Mudguard - Installation).
Fit the engine ECM (see Engine Electronic Control Module (ECM) - Installation).
Fit the chassis ECM (see Chassis Electronic Control Module (ECM) - Installation).
Fit the rear wheel (see Rear Wheel - Removal).
Refit the fuel tank (see Fuel Tank - Installation).
Refit and connect the battery (see Battery Installation).
Refit the rider's seat (see Rider's Seat - Installation).
Side Stand - Lubrication
620 of 746
cjid
1. Battery leads
2. Channel
1
cjib
1. Ambient air pressure sensor
2. Fixing
3
2
FRAME / BODYWORK