Tiger Explorer XR Series
Input Shaft - Installation
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
1.
Place the input shaft in position in the transmission housing, and insert the shaft fully in to the bearing.
2.
Refit the output shaft thrust washer, needle bearing and first gear.
3.
Refit the output shaft thrust washer and needle bearing.
4.
Secure the output shaft needle bearing with a new snap ring.
Refit the selector drum and selector forks (see Selector Drum and Selector Forks - Installation).
Refit the transmission to the engine (see Transmission - Installation).
Exploded View – Output Shaft
Output Shaft - Disassembly
189 of 746
chfn
Input Shaft Removal
WARNING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
TRANSMISSION