Triumph Tiger Explorer XR 2017 Service Manual page 593

Tiger Explorer XR Series
Engine Bars - Installation
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
Remove the rider's seat (see Rider's Seat - Removal).
Remove the battery (see Battery Removal).
Note
If the right hand engine bar is to be removed, the left hand engine bar must be removed first. This
will allow access to the lock nut for the lower crankcase mounting bolt.
1. Release the fixing securing the link bar to the left hand engine bar.
Note
Note that there is a 25 mm spacer between the left hand engine bar's centre mounting and the
engine for installation.
Note that the radiator mounting bracket is positioned between the engine bar and the engine for
installation.
2. Release the three mounting bolts and remove the left hand engine bar. Collect the 25 mm spacer from the
centre mounting.
589 of 746
1. Fixings (left hand shown)
2. Sump guard
WARNING
Left Hand Engine Bar
2
1
3
1. Fixing
2. Link bar
3. Engine bar, left hand side
3
6
2
FRAME / BODYWORK