Triumph Tiger Explorer XR 2017 Service Manual page 190

Tiger Explorer XR Series
Note
Prior to installation, lubricate both ends of each selector shaft, and their locating holes in the
transmission housing, with a 50/50 solution of engine oil and molybdenum disulphide grease.
1. Push the input shaft selector shaft into the transmission housing, with the two grooves facing towards the
housing, from the input shaft side. As the shaft is inserted locate the selector fork. Ensure the fork is fitted in
the position noted during removal.
2. Fit new E-clips to the grooves in the shaft between the selector fork and the transmission housing.
The selector forks can be fitted incorrectly. Ensure the position and orientation of the selector forks are
marked prior to removal. Incorrect fitting of the selector forks will cause gearbox damage or incorrect
operation.
3. Push the output shaft selector shaft into the transmission housing, with the single groove facing away from
the housing, from the output shaft side. As the shaft is inserted locate the selector forks. Ensure the forks
are fitted in the position noted during removal.
4. Fit a new E-clip to the groove in the shaft between the two selector forks.
186 of 746
chmt
1. E-clips
CAUTION
1
chms
1. E-clip
1
TRANSMISSION