Video Trigger Level Frequency - Agilent Technologies ESA-E Series Programmer's Manual

Language Reference
TRIGger Subsystem

Video Trigger Level Frequency

:TRIGger[:SEQuence]:VIDeo:LEVel:FREQuency <freq>
:TRIGger[:SEQuence]:VIDeo:LEVel:FREQuency?
This command is used to adjust the Video Trigger level when in FM
Demod, and Demod View is on.
Default Unit:
Remarks:
Trigger Delay is not available in Video trigger mode, so turning Video
NOTE
on turns off Trigger Delay, but preserves the value of Trigger Delay.
5-150
Hz
Video is adjusted using this command, but must also be
selected using the command
:TRIGger[:SEQuence]:SOURce VIDeo. When not
in FM Demod, the Video Trigger level is
adjusted/queried using the command
:TRIGger[:SEQuence]:VIDeo:LEVel <ampl>.
Chapter 5