Agilent Technologies ESA-E Series Programmer's Manual page 246

Emission BW Averaging On/Off
[:SENSe]:EBWidth:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:EBWidth:AVERage[:STATe]?
Turn on or off the channel power measurement averaging.
Factory Preset
and *RST: Off
Remarks: This command is used for measurements in the
MEASURE
Front Panel
Access:
Meas Setup, Avg Number On Off
Set Emission BW Span
[:SENSe]:EBWidth:FREQuency:SPAN <freq>
[:SENSe]:EBWidth:FREQuency:SPAN?
Set the emission bandwidth span. The analyzer span will retain this
value throughout the measurement.
Remarks: This command is used for measurements in the
MEASURE
Front Panel
Access:
Meas Setup, EBW Span
Emission BW Trace Max Hold On/Off
[:SENSe]:EBWidth:MAXHold OFF|ON|0|1
[:SENSe]:EBWidth:MAXHold?
Turn on or off the trace max hold trace feature for emission bandwidth
measurements.
Factory Preset
and *RST: On
Remarks: This command is used for measurements in the
MEASURE
maximum responses of a signal; max hold off disables
the feature.
Front Panel
Access:
Meas Setup, Max Hold On Off
Set Emission BW X dB Value
[:SENSe]:EBWidth:XDB <rel_ampl>
[:SENSe]:EBWidth:XDB?
Chapter 5
menu.
menu.
menu. Max hold on displays and holds the
Language Reference
SENSe Subsystem
5-91