[:Sense]:Average Subsection - Agilent Technologies ESA-E Series Programmer's Manual

Front Panel
Access:
Set Adjacent Channel Spacing
[:SENSe]:ACPower:CSPacing <freq>
[:SENSe]:ACPower:CSPacing?
Set the adjacent channel spacing.
Remarks:
Front Panel
Access:
[:SENSe]:
Clear the Current Average
[:SENSe]:AVERage:CLEar
Re-start the trace averaging function.
Re-start the trace at the beginning of a sweep to obtain valid average
NOTE
data. To do this, remotely abort the sweep and initiate a single sweep.
Front Panel
Access:
Set the Average Count
[:SENSe]:AVERage:COUNt <integer>
[:SENSe]:AVERage:COUNt?
Specifies the number of measurements that are combined.
Factory Preset
and *RST:
Range:
Front Panel
Access:
Turn Averaging On/Off
[:SENSe]:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:AVERage[:STATe]?
This command toggles averaging off and on. Averaging combines the
value of successive measurements to average out measurement
variations.
Chapter 5
Meas Setup, Main Chan BW
This command is used for measurements in the
menu.
MEASURE
Meas Setup, Main Chan Spacing
AVERage Subsection
none
100
1 to 8192
BW/Avg, Average On Off
Language Reference
SENSe Subsystem
5-81