Agilent Technologies ESA-E Series Programmer's Manual page 320

Error Messages
Informational Messages
Table saved successfully.
This message appears after the user presses the
Save Table
the out-of-band spurious measurement. It indicates
that the current spur table has been written
successfully to disk and is available to be loaded by
means of the
Volume <name> formatted
The indicated disk has been successfully formatted.
The calibration data is invalid, and has been
cleared.
A parameter has changed that affects calibration.
Therefore the calibration data has been reset, and for
best results recalibration is recommended.
The file containing the list of cable types
has been updated.
The file update was successful.
This operation requires a measurement to be
active.
The analyzer cannot perform this operation, as it
requires a measurement to be running.
7-12
key on the second page of the edit table for
key.
Load Table
Chapter 7