Create A New Directory; Delete A Directory; Store A Corrections Table To A File - Agilent Technologies ESA-E Series Programmer's Manual

If the revision of the state being loaded is newer than
the revision of the instrument, no state is recalled and
an error is reported.
If the revision of the state being loaded is equal to the
revision of the instrument, all regions of the state will
be loaded.
If the revision of the state being loaded is older than the
revision of the instrument, the instrument will only
load the older regions of the state.

Create a New Directory

:MMEMory:MDIRectory <name>
This command creates a new directory.
Example:
:MMEM:MDIR "C:\myDir"
Front Panel
Access:
File, Create Dir

Delete a Directory

:MMEMory:RDIRectory <name>
This command deletes a directory.
Example:
:MMEM:RDIR "C:\myDir"
Remarks: This command deletes the specified directory and all
files and subdirectories within that directory.
Front Panel
Access:
File, Delete

Store a Corrections Table to a File

:MMEMory:STORe:CORRection
ANTenna|CABLe|OTHer|USER,<file_name>
Stores the specified correction set to the file named <file_name>.
Example:
:MMEM:STOR:CORR ANT, "A:TEST1.ANT"
Remarks: This command will fail if the <file_name> already
exists.
Front Panel
Access:
File, Save, Corrections
Chapter 5
Language Reference
MMEMory Subsystem
5-71