Agilent Technologies ESA-E Series Programmer's Manual page 339

769
Invalid instrument mode
You have attempted to switch to an instrument mode
that is currently not installed. Confirm that the mode
name (for INST:SEL) or number (for INST:NSEL) was
entered correctly and that the requested personality is
actually installed in the instrument.
221
Invalid option, unable to uninstall package
You have attempted to remove a personality that is not
currently installed. Verify command was entered
correctly.
701
Invalid printer response
In attempting to identify the printer an invalid
response was received. Check that you are using a
supported printer. Be sure you are using the proper
cable and that it is securely fastened.
606
Media is corrupt
A save was attempted to a corrupt device.
609
Media is not writable
A save was attempted to a read-only device.
605
Media is protected
A save was attempted to a write-protected device.
202
No peak found
No signal peak was found.
201
Option not installed
The desired operation cannot be performed because a
required option is not installed. For example, pressing
Source
analyzer will generate this error.
Chapter 7
with no tracking generator installed in the
Error Messages
201 to 799: Device-Specific Errors
7-31