Agilent Technologies ESA-E Series Programmer's Manual page 261

Language Reference
SENSe Subsystem
Sweep Time Mode
[:SENSe]:SWEep:TIME:AUTO:MODE SRESponse|SANalyzer
[:SENSe]:SWEep:TIME:AUTO:MODE?
Specifies the type of automatic coupling for the fastest sweep time at
the current settings.
Stimulus response
Spectrum analyzer
Factory Preset
and *RST: SANalyzer
Front Panel
Access: Sweep, Sweep Coupling SR SA
Time Gating Delay
[:SENSe]:SWEep:TIME:GATE:DELay <time>
[:SENSe]:SWEep:TIME:GATE:DELay?
Sets the delay time from when the gate trigger occurs to when the gate
opens. This is for EDGE triggering only.
Factory Preset
1 µs
and *RST:
0.3 µs to 429 seconds
Range:
Default Unit: seconds
Front Panel
Access:
Sweep, Gate Setup, Edge Setup, Gate Delay
Time Gate Length
[:SENSe]:SWEep:TIME:GATE:LENGth <time>
[:SENSe]:SWEep:TIME:GATE:LENGth?
Specifies the gate time length in seconds. For EDGE triggering only.
Factory Preset
1 µs
and *RST:
0.3 µs to 429 seconds
Range:
Default Unit: seconds
Front Panel
Access:
Sweep, Gate Setup, Edge Setup, Gate Length
Time Gate Level
[:SENSe]:SWEep:TIME:GATE:LEVel HIGH|LOW
5-106 Chapter 5