[:Sense]:Chpower Subsection - Agilent Technologies ESA-E Series Programmer's Manual

Language Reference
SENSe Subsystem
CHPower Subsection
[:SENSe]:
Set Channel Power Number of Averages
[:SENSe]:CHPower:AVERage:COUNt <integer>
[:SENSe]:CHPower:AVERage:COUNt?
Set the channel power measurement number of averages.
Remarks: This command is used for measurements in the
MEASURE
Front Panel
Access:
Meas Setup, Avg Number
Channel Power Averaging On/Off
[:SENSe]:CHPower:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:CHPower:AVERage[:STATe]?
Turn on or off the channel power measurement averaging.
Factory Preset
and *RST: Off
Remarks: This command is used for measurements in the
MEASURE
Front Panel
Access:
Meas Setup, Avg Number On Off
Set Channel Power Integration Bandwidth
[:SENSe]:CHPower:BANDwidth|BWIDth:INTegration <freq>
[:SENSe]:CHPower:BANDwidth|BWIDth:INTegration?
Set the frequency span (bandwidth) over which to integrate power.
Remarks: This command is used for measurements in the
MEASURE
Front Panel
Access:
Meas Setup, Integration BW
Set Channel Power Span
[:SENSe]:CHPower:FREQuency:SPAN <freq>
[:SENSe]:CHPower:FREQuency:SPAN?
Set the measurement channel power span of the analyzer.
Remarks: This command is used for measurements in the
MEASURE
5-84
menu.
menu.
menu.
menu.
Chapter 5