Agilent Technologies ESA-E Series Programmer's Manual page 333

–150
String data error
This error, as well as errors –151 through –159, is
generated when parsing a string data element. This
particular error message is used if the device cannot
detect a more specific error.
–158
String data not allowed
A string data element was encountered, but not allowed
by the device at this point in the parsing.
–130
Suffix error
This error, as well as errors –131 through –139, is
generated when parsing a suffix. This particular error
message is used if the device cannot detect a more
specific error.
–138
Suffix not allowed
A suffix was encountered after a numeric element
which does not allow suffixes.
–134
Suffix too long
The suffix contained more than twelve characters (see
IEEE 488.2, 7.7.3.4).
–102
Syntax error
An unrecognized command or data type was
encountered. For example, a string was received when
the device does not accept strings.
–124
Too many digits
The mantissa of a decimal-numeric data element
contained more than 255 digits excluding leading zeros
(see IEEE 488.2, 7.7.2.4.1).
–113
Undefined header
The header is syntactically correct, but it is undefined
for this specific device. For example, *XYZ is not defined
for any device.
Chapter 7
Error Messages
–199 to –100: Command Errors
7-25