Agilent Technologies ESA-E Series Programmer's Manual page 157

Language Reference
The first few pages of this chapter contain common commands specified
in IEEE Standard 488.2-1992, IEEE Standard Codes, Formats,
Protocols and Common Commands for Use with ANSI/IEEE Std
488.1-1987. New York, NY, 1992. Following these commands, the
Agilent ESA spectrum analyzers SCPI commands are listed.
Refer to
NOTE
Chapter 7, "Error Messages"
presented in this chapter. In addition, refer to Chapter 6, "Front-Panel
Key Reference," in the Agilent ESA Spectrum Analyzers User's Guide
for additional information about the operation of each analyzer
function. Use the analyzer
about analyzer key functions.
Refer to
Programming Conversion Guide"
information between commands for HP/Agilent 8590-Series spectrum
analyzers and Agilent ESA analyzers.
5-2
Chapter 2 , "Status Registers"
HELP
Chapter 6, "Agilent 8590/ESA Spectrum Analyzers
and the status messages in
which supplements the information
key to obtain similar information
for specific backwards compatibility
Chapter 5