[:Sense]:Power Subsection - Agilent Technologies ESA-E Series Programmer's Manual

[:SENSe]:OBWidth:FREQuency:SPAN?
Set the occupied bandwidth span. The analyzer span will retain this
value throughout the measurement.
Remarks: This command is used for measurements in the
MEASURE
Front Panel
Access:
Meas Setup, OBW Span
Set OBW % Power
[:SENSe]:OBWidth:PERCent <percent>
[:SENSe]:OBWidth:PERCent?
Set the occupied bandwidth power in percent.
Remarks: This command is used for measurements in the
MEASURE
Front Panel
Access:
Meas Setup, Occ BW % Pwr
POWer Subsection
[:SENSe]:
Input Attenuation
[:SENSe]:POWer[:RF]:ATTenuation <rel_ampl>
[:SENSe]:POWer[:RF]:ATTenuation?
Set the input attenuator. This value is set at its auto value if input
attenuation is set to auto.
Factory Preset
and *RST: 10 dB
Range: ESA E4401B, E4411B: 0 to 60 dB
ESA E4402B, E4403B: 0 to 75 dB
ESA E4404B: 0 to 75 dB
ESA E4405B: 0 to 75 dB
ESA E4407B, E4408B: 0 to 65dB
Default Unit: dB
Front Panel
Access:
AMPLITUDE/Y Scale, Attenuation Auto Man
Input Port Attenuator Auto
[:SENSe]:POWer[:RF]:ATTenuation:AUTO OFF|ON|0|1
Chapter 5
menu.
menu.
Language Reference
SENSe Subsystem
5-101