Agilent Technologies ESA-E Series Programmer's Manual page 158

SCPI Sections and Subsections
SCPI commands related to major functional areas (such as calculate or
sense) are grouped into blocks, or subsystems. Some of these
subsystems are further divided into subsections (such as
calculate/marker, or sense/harmonics). An instrument model is then
created to represent the way in which instument functionality is viewed
and categorized by SCPI. Refer to IEEE SCPI-1997 Volume 2:
Command Reference, Standard Commands for Programmable
Instruments, Version 1997.0, May, 1997 for a more complete description
of the SCPI instrument model.
The SCPI subsystems in this chapter are listed in alphabetical order.
Likewise, the SCPI commands are in alphabetical order within the
subsystem in which they belong. Refer to the following table to locate
SCPI command subsystems and subsections by page number.
SCPI
Subsystem/Subsection
IEEE Common Commands
:ABORt
:CALCulate
:CALCulate:LLINe
:CALCulate:MARKer
:CALCulate:NTData
:CALibration
:CONFigure
:COUPle
:DISPlay
:FETCh
:FORMat
:HCOPy
IEEE Common Commands
:INITiate
:INPut
:INSTrument
Chapter 5
SCPI Sections and Subsections
Page
page 5-5
page 5-10
page 5-11
page 5-12
page 5-19
page 5-31
page 5-32
page 5-37
page 5-38
page 5-39
page 5-46
page 5-51
page 5-54
page 5-5
page 5-57
page 5-60
page 5-62
Language Reference
5-3