Agilent Technologies ESA-E Series Programmer's Manual page 257

Language Reference
SENSe Subsystem
[:SENSe]:POWer[:RF]:ATTenuation:AUTO?
Select the input port attenuator range to be set either automatically or
manually.
On – Input attenuation is automatically set as determined by the
Reference Level Setting.
Off – Input attenuation is manually set
Factory Preset
and *RST: On
Range: ESA E4401B, E4411B: 0 to 60 dB
ESA E4402B, E4403B: 0 to 75 dB
AESA E4404B: 0 to 75 dB
ESA E4405B: 0 to 75 dB
ESA E4407B, E4408B: 0 to 65dB
Front Panel
Access:
Input/Output (or Input), Input Atten
Input Port Power Gain
[:SENSe]:POWer[:RF]:GAIN[:STATe] OFF|ON|0|1
[:SENSe]:POWer[:RF]:GAIN[:STATe]?
Turns the internal preamp on or off.
Factory Preset
and *RST: Off
Front Panel
Access:
AMPLITUDE/Y Scale, Int Preamp On Off
Input Port Maximum Mixer Power
[:SENSe]:POWer[:RF]:MIXer:RANGe[:UPPer] <ampl>
[:SENSe]:POWer[:RF]:MIXer:RANGe[:UPPer]?
Specifies the maximum power at the input mixer.
Factory Preset
−10 dBm
and *RST:
Range: –100 dBm to –10 dBm
Default Unit: dBm
Front Panel
Access:
AMPLITUDE/Y Scale, Max Mixer Lvl
5-102 Chapter 5