2. Lift up the cover so the bottom tabs clear the frame and remove the cover.
3. To re-install, follow these steps in reverse order.
When re-installing, align and insert the bottom tabs first, then secure the cover with the
screws.
Communications panel cover
Remove the cover to access the communications panel.
1. Push down on the cover's center tab.
2. Lift up the cover just enough for the bottom tabs to clear the frame and remove.
3. To re-install, follow these steps in reverse order.
When re-installing the cover, insert the tabbed end first then lift the cover until top tab clips
into place
Light engine air filter cover
Remove the cover to access the light engine air filter.
1. Push down on the cover's tabs.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projector covers and feet
54