Checking The Flywheel/Alternator Assembly - Ducati Monster 796 Workshop Manual

Flywheel - alternator
Important
Examine the inner race (18), needle roller bearing (19) and internal washer (17) for wear.
Note
The hole in the inner race (18) allows the passage of oil for lubrication of needle roller bearing (19).

Checking the flywheel/alternator assembly

Examine the inner part of alternator rotor (23) for signs of damage.
Check that the starter clutch is working properly and that the needle races do not show signs of wear or damage of any
kind.
If there is any malfunction, remove the whole assembly.
Disassembly of the flywheel-alternator assembly.
Unscrew the eight screws (25) and remove the alternator rotor (23) from the flywheel.
Insert two of the screws (25) just removed from the flywheel rotor-side in their holes in order to remove the flange (13)
and the starter clutch (21) from the flywheel (16).
The starter clutch is a slight interference fit on the flange. To remove it, use a suitable drift.