Crankcase assembly: external components
Refitting the starter motor gear
Refitting is the reverse of removal.
Note
Apply threadlocker to the screw (26) and tighten the screw to a torque of 10 Nm (Min. 9 Nm - Max. 11 Nm) (Sect. 3 - 3,
Engine torque
settings).
Operations
Refit the flywheel/alternator
assembly
Refit the generator cover
Refit the sprocket cover
Refit the clutch transmission unit
Refit the gearchange control
Fill the engine with oil
Section reference
9 - 8,
Refitting the flywheel-
alternator assembly
9 - 8,
Refitting the generator cover
7 - 14,
Refitting the front sprocket
7 - 8.2,
Refitting the clutch
transmission unit
7 - 9,
Refitting the gearchange
mechanism
4 - 3,
Changing the engine oil and
filter cartridge