Table of Contents
Advertisement
Front brake control
Loosen the screw (16) and slide the pipe (14) from the bracket (4) on the bottom yoke.
Warning
While removing the front brake hose, if you damage the hose clip (B) you shall renew it (Sect. 5 - 4,
mudguard).
If hose is not fastened by hose clip (B), it might interfere with tyre under braking and provoke accidents.
Loosen the two retaining screws (17) securing the left front brake calliper (7) to the fork leg.
Repeat the operation for the right brake calliper (18).
Free ABS sensor cable (A) from the dust seal (22) on front left-hand brake calliper (7).
Loosen the special screws (13) and (27) and recover the sealing washers (12) from both callipers.
Separate the front brake callipers from the brake pipes.
Note
Removal of the front
Advertisement
Chapters
Table of Contents
