Instruments
Light off
ABS disabled with the menu
-
function "DISAB ABS" (*)
Light off
ABS disabled with the menu
-
function "DISAB ABS"
Light off
ABS enabled
ABS disabled with the menu
and functioning
function "DISAB ABS"
(*) depending on the model, each calibration of the Engine Control Unit may have a different "setting" for the thresholds
that precede the rev limiter and the rev limiter itself.
(**) The ABS should be considered actually disabled only if the light continues to flash after starting the engine.
Display settings and functions
On switching on the power (key turned from OFF to ON), the instrument panel activates all the digits of the LCD for
1 second and switches on all the warning lights in sequence.
It then reverts to "normal" mode and, in place of the odometer, shows the model and, for 2 seconds, also the version
(EU, UK, USA, CND, FRA, JAP).
The model is scrolled on the display once only.
Light flashing
ABS enabled but not
functioning yet
Engine on / speed below 5 Km/h
Light flashing
ABS enabled but not
functioning yet
Engine on / speed above 5 Km/h
Light flashing
ABS disabled and not
functioning due to a
problem.
Light steady
Light steady
Light steady