Ducati Monster 796 Workshop Manual page 354

Handlebar unit: clutch lever
Warning
An incorrectly positioned hose can cause clutch faults and interfere with moving parts.
Position the two gaskets (8) and tighten the screw (10) to a torque of 23 Nm ±10% (Sect. 3 - 3,
Refit the bleed valve (11) and the dust cap (12).
To position the pipe retaining clamps (6) refer to the table on the following page.
Operations
Fill the clutch circuit
Positioning of the clutch hose
Section reference
4 - 3, Filling the clutch circuit
Frame torque settings).