Ducati Monster 796 Workshop Manual page 685

Crankcase assembly: crankshaft/connecting rods assembly
Operations
Reassemble the engine crankcase
halves
Refit the mesh filter
Refit the cylinder barrel/piston
assemblies
Refit the complete cylinder head
unit
Refit the timing belts
Refit the timing covers
Refit the starter motor
Refit the starter motor idler gear
Refit the flywheel/alternator
assembly
Refit the alternator-side crankcase
cover
Refit the primary gear
Refit the oil pump
Refit the clutch assembly
Refit the clutch-side crankcase
cover
Refit the engine to the frame
Section reference
9 - 9.2, Reassembly of the
crankcase halves
4 - 3, Changing the engine oil and
filter cartridge
9 - 5, Refitting the cylinder/piston
assembly
9 - 4.4, Refitting the cylinder head
assembly
9 - 4.2, Refitting the timing system
assembly
9 - 4.2, Refitting the timing belt
covers
6 - 3, Refitting the starter motor
9 - 9.1, Refitting the starter motor
gear
9 - 8, Refitting the flywheel-
alternator assembly
9 - 8, Refitting the generator cover
9 - 6.3, Refitting the primary drive
gears and checking backlash
9 - 2.1, Refitting the oil pump
9 - 6.1, Refitting the APTC clutch
9 - 6.2, Refitting the clutch cover
9 - 1, Refitting the engine