Overhauling The Front Wheel - Ducati Monster 796 Workshop Manual

Front wheel
Support the bike so that the front wheel is raised from the ground.
Remove the front brake calliper (B) by unscrewing the two screws (A) securing the calliper to the fork leg; do not
disconnect the calliper from the hose.
Warning
Do not operate the brake lever when the callipers are removed. This could cause fluid to leak out from the actuating
pistons.
Loosen and remove the nut (1) on left side of the wheel shaft.
Loosen the shaft clamp screws (2) on the ends of the fork legs.
Working from the left side, use a plastic mallet to drive the wheel shaft (8) out from the opposite side.
Remove the wheel and recover the spacers (3) and (10).

Overhauling the front wheel