Gearbox assembly: gearbox shafts
Figure 2 shows all the parts to be installed on the gearbox secondary shaft (25), with calculated end shims (15) and (26)
(Sect. 9 - 9.2,
Shimming the
shafts).
Reassemble the gears on the gearbox shafts by reversing the disassembly procedure.
Take particular care when installing the idler gears. The assembly of the 3 rd and 4 th speed gears and the relative fixing
components on the secondary shaft is given as an example.
Fit the circlip (7), checking that it is fully inserted into its groove on the shaft. Push the circlip into position with a suitable
size tubular drift.