Removal–refitting of the engine assembly
Refitting the engine
Refitting is the reverse of removal.
Important
Position the correct shims between engine and swingarm (Sect. 7 - 13,
Lubricate the nuts (3) of mounting bolts (2).
Tighten the nuts (3) to a torque of 60 Nm
Operations
Connect wiring connectors on the
engine block
Refit the vertical head exhaust
pipe and the horizontal head
exhaust pipe
Refit the side stand
Refit the front sprocket cover
Refit the clutch transmission unit
Refit the footrests
Refit the rear brake fluid reservoir 7 - 4,
Refit the gearchange control
±
5% (Sect.
3 - 3,
Section reference
6 - 1,
Routing of wiring on frame
8 - 8,
Refitting the exhaust system
7 - 16,
Refitting the side stand
7 - 14,
Refitting the front sprocket
7 - 8.2,
Refitting the clutch master
cylinder assembly
7 - 15,
Refitting the footrest brackets
Refitting the rear brake control
9 - 7.2,
Reassembly of the gearbox
Refitting the
swingarm).
Engine torque
settings).