Removal Of The Swingarm - Ducati Monster 796 Workshop Manual

Rear swingarm
Fit the rear brake calliper (A) over the brake disc, aligning it with the holes in the calliper mounting bracket. Grease the
threads and undersides of the heads of the screws (B). Tighten the screws (B) to a torque of 25 Nm ±5% (Sect. 3 - 3,
Frame torque settings).
Operations
Tension the chain
Refit the rear sprocket
Refit the rear wheel

Removal of the swingarm

Before removing the parts in question, you must first carry out the following operations:
Operations
Slacken the chain
Remove the rear mudguard
Remove the rear wheel
Remove the rear sprocket
Remove the shock absorber from
swinging arm
Remove the footrests
Section reference
4 - 3, Adjusting the chain tension
7 - 14, Refitting the rear sprocket
7 - 2, Refitting the rear wheel
Section reference
4 - 3, Adjusting the chain tension
5 - 4, Removing the rear mudguard
7 - 2, Removal of the rear wheel
7 - 14, Replacing of the rear
sprocket
7 - 12, Removal of the rear shock
absorber
7 - 15, Removal of the footrest
brackets