Cylinder head assemblies: camshafts
Refitting the intake manifolds
Apply the recommended threadlocker to the stud bolts (12) and (13), install them on the cylinder heads and tighten them
to a torque of 15 Nm (Min. 13 Nm - Max. 17 Nm) (Sect. 3 - 3,
Engine torque
settings).
Locate the intake manifolds (17) and secure with the nuts (14).
Tighten the nuts (14) to a torque of 23 Nm (Min. 20 Nm - Max. 26 Nm) (Sect. 3 - 3,
Engine torque
settings).