Ducati Monster 796 Workshop Manual page 587

Hide thumbs Also See for Monster 796:

Table of Contents

Clutch assembly: APTC wet clutch

Unscrew the retaining screws (1) and remove the collars (2) and the clutch springs (4).

Remove the pressure plate (5) with the clutch control pin (3). If necessary, using a drift of suitable diameter, remove the

bearing (6) installed on the inner side of the pressure plate (5).

Hold the clutch drum with the service tool part no. 88713.2556 and unscrew the fastening nut (8).

Chapters

Table of Contents