Refitting The Exhaust System - Ducati Monster 796 Workshop Manual

Exhaust system

Refitting the exhaust system

Renew the gaskets (1).
Refit the horizontal exhaust pipe (3) and the vertical exhaust pipe (4) on the cylinder heads, starting the nuts (9) in their
threads.
To tighten the nuts (9) execute the following operations.
Note
The text "right" and "left" refer to the direction of travel.
Tighten initially to a torque of 6 Nm ±10% (Sect. 3 - 3, Frame torque settings) in the following order:
- the right nut (9) of the vertical cylinder head exhaust flange,
- the right nut (9) of the horizontal cylinder head exhaust flange,
- the left nut (9) of the horizontal cylinder head exhaust flange,
- the left nut (9) of the vertical cylinder head exhaust flange.
Tighten to a torque of 24 Nm ±10% (Sect. 3 - 3, Frame torque settings) in the following order:
- the right nut (9) of the horizontal cylinder head exhaust flange,
- the left nut (9) of the horizontal cylinder head exhaust flange,
- the left nut (9) of the vertical cylinder head exhaust flange,
- the right nut (9) of the vertical cylinder head exhaust flange.
Check that the quick-release fasteners (32) are installed on the horizontal cylinder exhaust pipe (3).
Refit the horizontal heat shield (13) securing it with the retaining screws (42), the spacers (25) and the washers (34).
±
Tighten the screws (42) to a torque of 8 Nm 10% (Sect. 3 - 3, Frame torque settings).